E-Catalog > CEM Microwave > เครื่องสกัดตัวอย่าง

PAGE VIEW : 17,504

Product Information :

Name :
Category :
  1. เครื่องมือวิทยาศาสตร์ / สารเคมีและวัสดุภัณฑ์สำหรับห้องปฏิบัติการ
Sub - Category :
  1. CEM Microwave
Brand :
Model :
Product Type :
  1. สินค้า, ผลิตภัณฑ์
Short Description :
The EDGE® has revolutionized the extraction process for sample preparation. Extract up to 30 grams in only five minutes, including the filtering and cooling process; 6 times faster than other pressurized fluid extractors.

Product Detail :


The EDGE® is an automated extraction system that’s faster than Soxhlet, more automated than QuEChERS, and simpler than other solvent extraction systems. Extract a wide range of samples and sizes at least 3 times faster than other pressurized fluid extractors. This includes filtering, cooling, and washing. The EDGE has revolutionized the extraction process for sample preparation.



  • Fastest technique available
  • Sample holders are easily assembled and cleaned (Q-Cups)
  • Small footprint
  • One technology with unlimited applications

Automated Extraction Process

Touch “start” to begin the automated process.

1. Select a Method

After a rack of Q-Cups containing samples are loaded into the EDGE, simply select the proper method, program the number of samples, and hit “Start”.

2. Autosampler Loads Sample

The Q-Cup is automatically loaded into the chamber by the autosampler. The pressure cap then creates a pressurized seal on the top of the Q-Cup.

3. Matrix is Extracted

Solvent is first added through the bottom to fill the gap between the chamber and Q-Cup, this aids in heat transfer. Then, solvent is added through the top of the Q-Cup to wet the sample.

As the chamber walls are heated, the pressure in the gap increases. This overcomes the pressure inside the Q-Cup, forcing the solvent to disperse into the sample.

4. Extract is Collected

Once the sample reaches temperature, the solvent is dispended through the Q-Disc, the cooling coil, and into a collection vial.

Q-Cup® Sample Holder

A simple solution to a complicated problem.

The aluminum Q-Cup sample holder consists of three easy-to-assemble pieces.

1. Q-Cup Cylinder
2. Q-Disc®
3. Threaded Bottom

The open top creates a dispersive effect which promotes rapid extraction and filtration. The disposable Q-Discs completely filters your sample prior to analysis. No additional steps are required. The simple design lends itself to easy cleaning.


Loading the EDGE Rack

Load your samples in seconds.

Once the samples are placed in the Q-Cups, the Q-Cups are loaded into the rack along with the glass collection vials.

Next, the rack is loaded into the EDGE. The samples are then ready for the automated extraction process.

Pressurized Fluid Extraction and Solid Phase Extraction (SPE)


Get better results with one instrument.

  • Dispersive Solid Phase Extraction
  • Pressurized Fluid Extraction
  • Supported Liquid Extraction

No need for multiple systems for different samples, EDGE is the answer for all extractions, made possible by Q-Cup Technology. No matter your technique, you’ll extract a particle-free solution, ready for analysis.

Solvent Extraction Instrument – Small and Compact


Its small size is a big advantage.

The EDGE is only 14.25” wide. That’s about the width of an analytical balance. You can have multiple EDGE systems placed side-by-side on one bench top.

Other Product In Group "CEM Microwave (16)"