FV32Plus
A dual-mode parallel concentrator combining needle-following and vortex nitrogen blowing can allow for batch quantitative concentration of samples. Each channel is independently controlled and equipped with an infrared level sensor for precise volume determination. The instrument is designed with advanced multi-way balanced gas supply structure to ensure the parallelism of batch sample concentration. Equipped with […]
QSE-12/24
Based on the principle of similar solubility between substances, QSE is applied to process liquid samples whose volatile and semi-volatile compounds will be enriched and purified during the process. With delicate design, QSE Series guarantee sample recovery and convenient operation.
iQSE-02/06
Based on the principle of pressurized solvent extraction method, it can extract multiple solid or semi-solid samples rapidly with high temperature and high pressure, ensuring good parallelism of extraction operations and greatly reducing the extraction time and solvent consumption. It is widely used in the detection of environmental SVOCs (soil, sediment, solid waste, etc.), pesticide […]
iGHP-37C
iGHP-37C is designed for sample wet digestion. With dual PID temperature control mode, independent control of the heating of the inner and outer layers ensures uniformity of temperature on the board surface and high purity graphite plate surface is coated with high temperature and corrosion resistant ceramic. 7” HD color touchscreen displays temperature curve simultaneously […]
iGBlock-36/81
Three-dimensional heating of the iGBlock can reduce heat loss and greatly improve the efficiency of heat energy utilization. The intelligent PID precise temperature control mode can realize multi-stage programmed temperature rise. The excellent temperature uniformity between holes effectively ensures the parallelism and reproducibility of digestion. The iGBlock-81 is exclusively for urinary iodine and urinary arsenic […]
QuickTrace M‑8000
The QuickTrace® M-8000 Cold Vapor Atomic Fluorescence (CVAF) mercury analyzer is ideal for ultra-trace to sub-mg/L mercury quantitation. Due to the high sensitivity of the M-8000, it easily achieves the ultra-trace detection limit of <0.05 ng/L total mercury that is demanded by customers following EPA method 1631. The QuickTrace® M-8000 is also versatile enough to […]
QuickTrace M‑7600
The QuickTrace® M-7600 Cold Vapor Atomic Absorption (CVAA) Mercury Analyzer easily achieves the ultra-trace mercury detection limit of <0.5 ng/L. The QuickTrace® M-7600 is ideal for ultra-trace to sub-mg/L mercury quantitation. The M-7600 is designed for routine and research use in a variety of settings, including environmental laboratories, industry, and research institutes, for virtually any […]
Discover SP-D Clinical
Automated Microwave Digestion SystemDiscover SP-D ClinicalOverviewFast and remarkably simple, the Discover® SP-D Clinical is specifically designed to digest small samples for clinical applications. This automated system will optimize your laboratory workflow.FeaturesMost digestions complete in under 6 minutes (including cooldown)Automatically loads and unloads samplesTemperature and pressure control of every sampleDocumentation of every sampleSimple-to-use vessels with snap-on […]
SAM255
The SAM 255™ is a unique instrument for rapidly drying samples up to 1 kg in size. It can be used for moisture analysis or as a preparatory step for further analysis. Drying times are reduced from hours to minutes with the precision of a conventional oven method. Almost any material can be dried using […]
DEENA 4
Ideal for metals, mercury, total phosphorous (TP) and total nitrogen (TN) digestions, the DEENA 4 system fully automates the sample digestion process. Bringing increased hardware options and a higher-resolution ultrasonic sensor than the preceding DEENA II, it quickly and accurately dispenses small volumes of reagents into sample tubes, mixes thoroughly, applies heat, and then fills […]