SIGMA™
The SIGMA family is based on a CsI scintillator crystal coupled to a ‘state-of-the-art’ SiPM (Silicon Photomultiplier) detector, high voltage, electronics and integrated MCA. The Features
Encapsulated Detectors
Encapsulation drastically enhances the germanium detector reliability. This technology is key for many applications, particularly in space, and especially if associated with Ultra-High Vacuum. Encapsulated germanium detectors may be easily handled by the users. The Features
ESLX-S and LTS Detectors
Segmentation techniques fit with all crystal designs: circular, rectangular, etc. ESLX-S detectors in a unique cryostat, offer high energy X-ray absorption or imaging capabilities. The Features
Discrete and Monolithic
The broad-band X-ray flux from synchrotron radiation sources has revitalized the relatively old experimental technique known as X-ray absorption spectrometry. X-ray absorption spectroscopy measures the attenuation of an X-ray beam passing through a sample, just as do the more familiar infrared or UV-visible techniques. Typical X-ray energies are on the order of 300 eV to […]
G2204
The Picarro G2204 gas concentration analyzer provides simultaneous, precise measurement of methane (CH4) and hydrogen sulfide (H2S) at parts-per-billion (ppb) sensitivity with negligible drift for emissions measurements from landfills, refineries, paper mills, or industrial plants. It can be installed in minutes for stationary monitoring, or it can be coupled using U.S. Environmental Protection Agency geospatial […]
CM (A0201)
The Combustion Module (A0201), designed for Picarro by Costech Analytical (NC Technologies), combusts solid and liquid samples with carbon contents as low as 250 µg. When paired with a Picarro isotopic analyzer (e.g. G2131-i), the Picarro Combustion Module CM-CRDS (A0201) system analyzes the carbon isotopic (δ13C) composition of samples in applications such as food authenticity […]
MARS 6 FAMES
The determination of the total amount of saturated & unsaturated fat is traditionally carried out by a procedure known as FAMES (Fatty acid methyl ester analysis). Fat is traditionally extracted from samples using a cold solvent extraction into solvents such as DCM or other petroleum based solvents. Extracts are then dried and derivatized to form […]
MARSXpress 2.0
Designed and built by the leader in sample preparation, the MARSXpress 2.0™ digestion system brings simplicity, flexibility, and accessibility to every laboratory. As the most cost-effective solution available, MARSXpress 2.0 will take care of your sample preparation needs. Features CEM MARSXpress 2.0 in Thailand The CEM MARSXpress 2.0 is a microwave digestion system for laboratory […]
SXD30M-500-PA
The X-PIPS Detector is a spectroscopy sub-system sensitive to X-rays and low-energy gamma rays. It comprises a hermetically sealed silicon drift detector (SDD) element with a low noise FET assembly and Peltier cooler. The detector element and FET preamplifier are cooled. The Beryllium entrance window is standard 0.5 mil. Detector System Includes Performance
SXD30-500-C
The X-PIPS Detector is a spectroscopy sub-system sensitive to X-rays and low-energy gamma rays. It comprises a hermetically sealed silicon drift detector (SDD) element with a low noise FET assembly and Peltier cooler, a reset type preamplifier, a HV bias supply, and a temperature controller. The detector element and FET are cooled and regulated to […]