The SP VirTis Ultra Prime 30 is a freeze dryer engineered for performance, repeatability and sustainability. What separates it from earlier designs is the direct vapor port, engineered to mitigate choked flow so vapour transfers more smoothly from the product chamber to the condenser and drying is more efficient.
Key features and benefits
- Direct vapor port design — engineered to mitigate choked flow, delivering smoother vapor transfer and more efficient freeze-drying.
- Space saving footprint — multiple standard layout options minimize overall footprint without compromising performance.
- Advanced LyoLogic HMI interface — precise control, simplified operation and improved repeatability.
- Enhanced cycle efficiency — helping reduce energy consumption, operating costs and environmental impact.
- Efficient cleaning and maintenance — smooth-walled condenser and easy defrost system minimize turnaround time.
- Customizable configurations — bulk or stoppering layouts, up to 15 shelves, solvent packages, and cleanroom installations; latch one or multiple shelves in seconds when changing container sizes.
- Lower GWP refrigerants — R1270 (GWP 2) and R170 (GWP 5.5), CFC-free.
Specifications
| Item | Value |
|---|---|
| Lowest shelf temperature (50 / 60 Hz) | ≤ -67 °C / -70 °C |
| Shelf temperature control range | -55 to 65 °C (tolerance ± 0.5 °C) |
| Condenser temperature | down to -85 °C |
| Vacuum level control range | 0.067 – 0.67 mbar (50 – 500 mTorr) |
| Volume-based leak rate | ≤ 0.0042 mbar·L/sec (≤ 3.2 mTorr·L/sec) |
| Lowest system vacuum | ≤ 0.2 mbar (≤ 15 mTorr) |
| Temperature uniformity | ± 1.0 °C |
| Construction | 316L stainless steel shelves, product chamber and condenser chamber |
| Vapor port | 15.2 cm (6 in) wide · 20.3 cm (8 in) narrow / cleanroom |
| Noise level | 75 dBA |
| Max. weight | 909 kg (narrow / cleanroom) |
Shelf configuration and vial capacity
| Shelves | Clearance with one shelf latched | Recommended vials |
|---|---|---|
| 5 shelves | 166.5 mm | 100H or smaller |
| 7 shelves | 115.2 mm | 100H or smaller |
| 8 shelves | 99.2 mm | 30R or smaller |
| 10 shelves | 76.8 mm | 20R or smaller |
| 12 shelves | 61.9 mm | 8R or smaller |
| 13 shelves | 56.2 mm | 6R or smaller |
| 15 shelves | 47 mm | 2R or smaller |
Estimated vial capacity per 10 × 20 in tray: 2R = 519 · 6R = 264 · 10R = 220 · 20R = 144 · 30R = 144.
SP VirTis Ultra Prime 30 is available in Thailand from Thai Unique, with installation, calibration and after-sales service handled by our own team here in the country. For details and a quotation, call 0-2629-0191-6 or email customer.service@thaiunique.com.
All specifications are taken from the manufacturer’s own documentation and are based on units operating at an ambient room temperature of approximately 20 °C; SP recommends an operating range of 15-25 °C. SP VirTis reserves the right to change specifications without notice.
SP VirTis Ultra Prime 30 in Thailand
The SP VirTis Ultra Prime 30 is a pilot-scale freeze dryer supplied and supported in Thailand by Thai Unique, designed around a direct vapor port that eases vapour flow from the product chamber to the condenser during lyophilisation.
Read moreMinimize
Where this freeze dryer is used in Thailand
Based on the specifications above, the Ultra Prime 30 suits laboratories that:
- Need shelf temperatures down to -67 °C at 50 Hz or -70 °C at 60 Hz, with programmed shelf control across -55 to 65 °C held to a tolerance of ± 0.5 °C.
- Work with several vial formats and change layout between campaigns — 5 shelves leave 166.5 mm clearance for larger containers, while 15 shelves close to 47 mm for 2R vials.
- Want cycles that repeat consistently between runs and operators, using the LyoLogic touchscreen controller (HMI) for setup and temperature uniformity of ± 1.0 °C across the shelf stack.
- Need product-contact surfaces suited to regulated or cleanroom work, with 316L stainless steel shelves and chambers, a smooth-walled condenser for faster turnaround, and CFC-free R1270 and R170 refrigerants.
Service and support in Thailand
An analytical instrument does not end at delivery. Thai Unique supports yours from within the country.
- Installation and calibration — our engineers install the system, run performance verification and calibrate it for your actual workload
- Scheduled preventive maintenance — year-round cover under a Service Contract, with costs you can budget for
- Repairs with genuine spare parts — experienced technicians using original components from the manufacturer
- Operator training — classroom and hands-on training on your own instrument
- Sample testing and method verification — we run your real samples and verify the method before you commit
Frequently asked questions
How many vials will the Ultra Prime 30 hold, and does shelf count change that?
Estimated capacity per 10 × 20 in tray is 519 vials at 2R, 264 at 6R, 220 at 10R and 144 at both 20R and 30R, while the number of shelves you latch sets the clearance and therefore the tallest container that fits. Our team here can work the numbers against your batch size and container spec.
Why buy SP VirTis Ultra Prime 30 from Thai Unique rather than direct from the manufacturer?
Because the people who look after it are here. Installation, calibration, scheduled maintenance, repairs with genuine parts and operator training are all handled by our team in Thailand, without routing every request overseas.
Can we test our own samples before deciding?
Yes. Our sample testing and method verification service runs your real samples so you can see the results this freeze dryer gives on your workload before you buy.
How much does it cost, and how do we request a quotation?
Pricing depends on the configuration, accessories and the scope of work in your laboratory. Tell our sales team what you need to analyse and how many samples you run per day, and we will propose a configuration together with lead time and service terms.
Request a quotation
Tell us what you need to analyse, how many samples you run per day and the sample types involved. Our team will propose the SP VirTis Ultra Prime 30 configuration that fits your work, with lead time and service terms — use the Request Quote button below, or contact our team directly.